Saskatchewan Forklift Training Schools

Saskatchewan Forklift Training Schools - Forklift Training Schools - The Best Option To Have An Efficient And Safe Work Area

If you are searching for work as an operator of a forklift, our regulatory-compliant forklift training Schools offer exceptional instruction in many types and styles of lift trucks, lessons on pre-shift inspection, fuel kinds and handling of fuels, and safe utilization of a lift truck. Hands-on, practical training assists participants in acquiring fundamental operational skills. Course content consists of existing regulations governing the use of forklifts. Our proven forklift Schools are meant to provide training on these types of trucks: narrow isle forklift, counterbalanced forklift and powered pallet truck.

Do not lower or raise the fork whilst the forklift is traveling. A load should not extend above the backrest due to the danger of the load sliding back toward the operator. Check for overhead obstructions and ensure there is sufficient clearance prior to raising a load. Stay away from overhead power lines. Once the load is raised straight up, tilt it back slightly.

While the load is raised the lift truck will be less stable. Make sure that no pedestrians cross below the elevated fork. The operator must never leave the lift truck while the load is lifted.

While handling pallets, forks should be high and level enough to go into the pallet and extend all the way below the load. The width of the forks must provide equal weight distribution.

Before loading or unloading the truck, chock the wheels and set the brakes. Floors need to be strong enough to support the weight of the load and the forklift combined. Fixed jacks can be installed in order to support a semi-trailer which is not attached to a tractor. The entrance door height should clear the height of the forklift by a minimum of 5 cm. Edges of docks, rail cars and ramps should be marked and avoid them.

Click to Download the pdf