Saskatchewan Aerial Boom Lift Training

Saskatchewan Aerial Boom Lift Training - Aerial Boom Lift Training is necessary for anybody who operates, supervises or works in the vicinity of boom lifts. This type of aerial lift or aerial work platform is utilized for lifting people, tools and materials in projects requiring a long reach. They are normally utilized to access other above ground job-sites and utility lines. There are various types of aerial booms lifts, like for instance articulating boom lifts, extension boom lifts and cherry pickers. There are two types of boom lift: "telescopic" and "knuckle".

Training in the essential equipment, safety and operations matters involved in boom lifts is important. Workers have to understand the dangers, safe work practices and rules whilst working amongst mobile machinery. Training program materials provide an introduction to the terminology, uses, skills and concepts essential for workers to gain experience in boom lift operation. The material is aimed at equipment operators, safety professionals and workers.

For your company requirements, this training is adaptive, cost-effective and educational and would help your workplace become safer and more effective, allowing for higher levels of production. Less workplace incidents occur in workplaces with stringent safety policies. All equipment operators must be trained and assessed. They need knowledge of present safety standards. They need to comprehend and follow rules set forth by their employer and local governing authorities.

Employers must ensure that their employees who operate aerial boom lifts get proper training in their safe use. Operator certification is required on every different kind of aerial machinery used in the workplace. Certifications are available for articulating booms, aerial work platforms, industrial forklift trucks, scissor lifts, etc. Employees who are completely trained work more efficiently and effectively than untrained employees, who require more supervision. Right instruction and training saves resources in the long run.

Training is the best prevention for the primary reasons for workplace fatalities: electrocutions, falls and collapses or tip overs. Aside from training, the best way to prevent workplace accidents is to operate and maintain aerial work platforms according to the manufacturer's instructions. Allow for the combined weight of the materials, worker and tools when adhering to load limitations. Never override electrical, hydraulic or mechanical safety devices. Employees must be securely held within the basket using a restraining belt or body harness with a lanyard attached. Do not move lift machinery while employees are on the elevated platform. Workers should be careful not to position themselves between the basket rails and beams or joists in order to prevent being crushed. Energized overhead power lines must be at least 10 feet away from the lift equipment. It is recommended that workers always assume wires and power lines might be energized, even if they seem to be insulated or are down. Set the brakes and use wheel chocks if working on an incline.

Click to Download the pdf