Saskatchewan Overhead Crane Operator Training

Saskatchewan Overhead Crane Operator Training - The program teaching overhead crane operator training has been meant specifically to instruct trainees on the basics of pre-shift inspections and overhead crane/sling operation. The courses are instructed by expert trainers and consultants. Well-trained employees are more productive and efficient, which saves on expenses associated with merchandise damage, property damage, and accidents due to the utilization of incorrect operating measures. Our overhead crane certification is customized for employees who have literacy barriers, reducing certification time by 50 percent.

Overhead cranes are suitable for specific repetitive lifting activities. This kind of crane has wide ranging capacities. They may be utilized for specialized lifting jobs such as removing or installing major plant machinery.

Operators and worker must employ safe rigging practices in order to safely operate an overhead crane. This would require both knowledge and practice because the load needs to be correctly rigged to guarantee its stability when hoisted. Prior to beginning a lifting job, it must be determined that the crane is suitable for the task, with correct capacity, travel and lift. The crane should be subjected to a thorough physical and visual inspection before utilization. The capacity of all equipment, including the hardware, rope and slings, must never go beyond load weight capacities.

Prior to using the rigger must know what sling is best for each and every lift and must inspect the rigging gear and hardware. The communications that are utilized with the crane operator have to be concise and clear. A signaler needs to be designated for the role and signals should be agreed upon. The operator of the crane should follow instructions just from the chosen person. If a remote or wired controller is being utilized, the operator should be trained in all its functions.

Prior to any lifting starts, the path of the load must be cleared of all hazards and a warning sign must be issued to ensure the safety of the staff. Pedestrian are not under any circumstance allowed to walk beneath the lift loads. The crane hoist should be centered over the load before lifting to prevent swinging. The safety catch has to be closed instantly after sliding the sling entirely onto the lifting hook. Sling legs which are not used must be secured so they do not drag. Never leave loose materials on a load being hoisted. Watch that fingers and hands are clear when slack is taken out of a sling. Before the lift is carried out, step clear of the danger zone.

Click to Download the pdf